Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Arlington Heights, IL
Chimney cap and crown work in Arlington Heights typically runs $450-$1,800 depending on whether we’re sealing a hairline crack or installing a multi-flue cap over an orphaned chimney chase. Most Arlington Heights homeowners book this service after a spring inspection reveals freeze-thaw damage they didn’t notice from the ground. Call (708) 498-3199 for a written estimate before any work starts.
We’re Level Two Chimney Co., and we’ve documented every chimney we’ve touched since 2009 under the Haven Standard. Our crews serve Arlington Heights from our Chicago office, and the village’s postwar housing stock keeps us busy with cap and crown issues that newer suburbs simply don’t see at this scale.
Why Arlington Heights Homes Are Different
Arlington Heights built out fast between 1950 and 1975, and the ranch homes and split-levels that dominate the village came with single masonry chimneys engineered for a mid-efficiency gas furnace and a wood-burning fireplace sharing adjacent clay-tile flues. As homeowners upgrade to 96% efficiency condensing furnaces that vent through PVC sidewall pipes, those chimneys go partially or fully “orphaned” - a condition we encounter on nearly every Arlington Heights call.
The northwest Cook County location means repeated freeze-thaw cycles all winter, with temperatures crossing 32°F multiple times per week. This accelerates mortar joint erosion and brick spalling far more aggressively than a sustained freeze would. Spring inspections in Arlington Heights routinely turn up fresh crown cracking and spalling that wasn’t there the prior fall. When one flue in a dual-flue chimney goes cold while the other stays active, the temperature differential drives condensation and creosote buildup in the remaining firebox flue - a failure mode local sweeps see repeatedly that homeowners rarely anticipate.
Our Main Arlington Heights Services
Three services account for most of our Arlington Heights calls. Jump to your job below, or read on for the cap, crown, liner, and rebuild work we handle directly on this page.
Chimney Cleaning & Sweep in Arlington Heights
Our Chimney Cleaning & Sweep in Arlington Heights includes an NFPA 211 Level 2 camera inspection, creosote removal, and a documented photo record under Haven Standard Clause 4. Arlington Heights’s orphaned chimneys and active fireplace flues often hide Class III glazed creosote that a brush-and-vacuum shop misses entirely.
Chimney Repair in Arlington Heights
Our Chimney Repair in Arlington Heights covers tuckpointing, brick replacement, and structural stabilization of the village’s aging mid-century chimneys. Freeze-thaw damage here progresses faster than in Lake County to the north because of the temperature swing frequency.
Fireplace Services in Arlington Heights
Our Fireplace Services in Arlington Heights include damper repair, smoke chamber parging, and firebox rebuilds. Many Arlington Heights fireplaces still have original throat dampers rusted open from decades of furnace exhaust sharing the flue.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Arlington Heights
Arlington Heights’s 50-70 year old chimneys need cap and crown work more often than new construction because the original concrete crowns were poured without proper overhang or reinforcement, and the village’s freeze-thaw cycles exploit every flaw. A cracked crown here isn’t a cosmetic issue - it’s an open path for water to saturate the chimney stack, destroy flue liners, and rot adjacent framing in the ranch and split-level rooflines that dominate the village. We handle Chimney Cap & Crown work under Haven Standard Clause 1: written price, written scope, written warranty before any tool touches the chimney.
Crown Repair
Signs you need it
Look for visible cracks in the concrete slab topping your chimney, pieces of crown concrete in the yard or gutters, or water staining on the ceiling near the chimney chase in Arlington Heights’s older ranches.
What it costs in Arlington Heights
Crown repair in Arlington Heights typically runs $650-$1,200 for crack sealing and resurfacing, while full crown replacement on a standard ranch chimney runs $1,400-$2,200.
How we do it
We grind out cracks to sound concrete, apply a bonding agent, and pour new high-strength crown mix with proper drip edge and slope; every repair gets photo documentation before, during, and after under Haven Standard Clause 4.
Cap Installation
Signs you need it
Arlington Heights homeowners need a cap when they find debris, animal nesting material, or water in the firebox, or when the flue terminal is completely open to the weather.
What it costs in Arlington Heights
Single-flue stainless steel cap installation in Arlington Heights runs $350-$650 installed; multi-flue caps for orphaned dual-flue chimneys run $750-$1,400 depending on chase dimensions.
How we do it
We measure the flue or chase opening, fabricate or source a proper-fitting cap with mesh screening, and secure it with masonry anchors or slip-fit mounting; the installation is photographed and the warranty is written before we leave.
What Chimney Cap & Crown Costs in Arlington Heights
| Item | Typical range in Arlington Heights |
|---|---|
| Single-flue cap installation | $350-$650 |
| Multi-flue cap installation | $750-$1,400 |
| Crown crack repair / coating | $650-$1,200 |
| Full crown replacement | $1,400-$2,200 |
Can a cracked crown wait until spring in Arlington Heights?
No - every freeze-thaw cycle drives water deeper into the crown and brickwork, and Arlington Heights typically sees 40+ such cycles per winter. We document the damage with our camera and give you a written price for repair before the next cold snap.
Do I need a cap if I don’t use my fireplace?
Yes - an uncapped flue lets rain and animals enter, and in Arlington Heights’s orphaned chimneys, that moisture accelerates deterioration of the remaining clay liner and surrounding brick. A cap is cheaper than a rebuild.
Chimney Liner & Rebuild in Arlington Heights
Arlington Heights’s original clay flue liners are now 50-70 years old, and the village’s shift to high-efficiency furnaces has left thousands of chimneys with cold, oversized flues that condense acidic moisture or improperly vent active fireplaces. We install Chimney Liner & Rebuild systems sized to the actual appliance - not the original 1960s specification - with a written price and photo record before work begins.
Stainless Steel Liner
Signs you need it
You’ll see tile fragments in the firebox, white efflorescence staining the exterior brick, or a camera inspection revealing cracked, offset, or missing clay tiles in the flue.
What it costs in Arlington Heights
Stainless steel liner installation in Arlington Heights runs $2,800-$4,500 for a standard fireplace flue, including insulation, top plate, and connector fitting.
How we do it
We run a camera to map damage, drop a properly sized flexible stainless liner with insulation, secure the top plate and bottom connector, and pressure-test the assembly; every joint is photographed and the warranty is documented under Haven Standard Clause 4.
Partial Rebuild
Signs you need it
Look for leaning chimney stacks, extensive spalling with brick faces popping off, or mortar joints eroded more than half an inch deep - common on Arlington Heights’s windward exposures.
What it costs in Arlington Heights
Partial chimney rebuild in Arlington Heights typically runs $3,500-$6,500 for rebuilding from the roofline up, including new crown, cap, and flashing integration.
How we do it
We scaffold the work area, dismantle to sound masonry, lay matching brick with proper bond and weep holes, and install a new reinforced crown; the rebuild progress is photo-documented at each course.
What Chimney Liner & Rebuild Costs in Arlington Heights
| Item | Typical range in Arlington Heights |
|---|---|
| Stainless steel liner (fireplace) | $2,800-$4,500 |
| Flexible liner (furnace / water heater) | $1,800-$3,200 |
| Partial rebuild (roofline up) | $3,500-$6,500 |
| Full chimney rebuild | $8,500-$15,000 |
Does an orphaned chimney always need a liner?
Not always - if the remaining fireplace flue has intact clay tile and proper sizing, we document that with our camera and tell you so. But when the flue is damaged or oversized for modern inserts, a stainless liner is the correct fix, and we show you exactly why before quoting.
Can you match my brick on a partial rebuild?
We source from Olympia Chimney and regional suppliers to match Arlington Heights’s common 1950s-1970s brick profiles and colors; if exact matching isn’t possible, we show you samples and document the selection in your written scope.
Brands We Service in Arlington Heights
We stock and install caps, liners, and repair materials from DuraFlex, HeatShield, Gelco, and Olympia Chimney through our Haven buying network. Most Arlington Heights jobs don’t require special-order waits - our Chicago office keeps standard liner diameters, cap sizes, and crown repair compounds on hand for next-day scheduling.
Pricing for Chimney Cleaning in Arlington Heights, IL
| Service | Typical range in Arlington Heights |
|---|---|
| Chimney sweep with Level 2 inspection | $250-$375 |
| Class III creosote removal (glazed) | $450-$750 |
| Single-flue cap installation | $350-$650 |
| Multi-flue cap installation | $750-$1,400 |
| Crown crack repair / coating | $650-$1,200 |
| Full crown replacement | $1,400-$2,200 |
| Stainless steel liner (fireplace) | $2,800-$4,500 |
| Flexible liner (furnace / water heater) | $1,800-$3,200 |
| Partial rebuild (roofline up) | $3,500-$6,500 |
| Full chimney rebuild | $8,500-$15,000 |
Prices in Arlington Heights push higher when we encounter hidden flue damage requiring liner upsizing, or when chimney access is limited by tight ranch rooflines with low pitches. Every job gets a written price before work starts - no exceptions, no surprises - under Haven Standard Clause 1.
Neighborhoods We Serve in Arlington Heights
We work across Arlington Heights’s full village limits, from the pre-WWII homes near the historic downtown core to the postwar subdivisions that fill most of the residential map. Crews are dispatched from our Chicago office and typically arrive within the scheduled window.
- Scarsdale
- Hasbrook
- Shenandoah
- Ivy Hill
- Greenbrier
Service Area - Cities Near Arlington Heights
Our crews cover the full northwest Cook County area, with regular work in Palatine, IL, Hoffman Estates, IL, Glenview, IL, and Park Ridge, IL. Scheduling is coordinated from our Chicago office with route optimization to keep appointment windows tight.
Serving Arlington Heights, IL - Our Local Coverage Area
We’re based in the Arlington Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Arlington Heights
Most chimney repairs and liner installations don’t require Arlington Heights permits, but full rebuilds or structural modifications may need village approval - we handle permit research as part of our written scope when it applies, and we tell you upfront if your job triggers that requirement.
We typically book inspections within 3-5 business days during peak fall season, and 1-2 weeks out in winter - call (708) 498-3199 for current availability. Emergency calls for blocked flues or suspected carbon monoxide issues get same-day prioritization.
Yes, though some Arlington Heights HOAs require advance notice or restrict scaffolding placement - we coordinate directly with your association when needed, and we document that communication in your job record under Haven Standard Clause 4.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Heights Customers Say
"Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."Clean, careful, put down sheeting, and the fireplace works properly for the first time since we moved in."
- Yvette S."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F.