Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Chimney Liner & Rebuild for Elmhurst Homeowners
Chimney liner replacement and chimney rebuilds in Elmhurst Chimney Liner & Rebuild typically cost between $2,800 and $8,500 depending on whether we’re installing a stainless steel liner in a sound flue or rebuilding a chimney with spalling brick and deteriorated mortar joints. Most liner installations in Elmhurst are completed in one day; partial and full rebuilds usually take two to four days once materials are staged. Call (708) 498-3199 to schedule a camera inspection and receive a written price before any work begins.
We’ve inspected more than 38,000 chimneys since 2009, and the ones in Elmhurst keep showing us the same pattern: beautiful homes built between 1910 and 1975 with original clay flue liners that have cracked after decades of freeze-thaw cycles, or unlined brick chimneys that were never built to handle modern gas appliance exhaust temperatures. The difference between a liner that needs replacement and a chimney that needs partial rebuilding is something we determine with a camera down the flue, not a flashlight from the top. Every inspection we perform follows NFPA 211 Level 2 standards, and every customer receives a documented photo record under Clause 4 of the Haven Standard. Corrine Halstead has built Level Two Chimney Co. on the principle that you should see what we see before you spend a dollar.
What Our Chimney Liner & Rebuild Service Includes
Stainless Steel Liner Installation
A stainless steel liner is a continuous metal tube inserted down the existing flue to create a sealed, properly-sized exhaust path for your fireplace or heating appliance. In Elmhurst, we install stainless steel liners most often in homes with clay flue tiles that have cracked due to thermal shock or where the original liner was never sized correctly for a newer high-efficiency furnace. Our crews measure the flue precisely, fabricate the liner to length on site using DuraFlex and Olympia Chimney materials, and insulate between the liner and flue wall to meet UL 1777 standards. The result is a written warranty, a photo record of the completed installation, and a chimney that vents safely for decades.
Flexible Liner Installation
Flexible liners are corrugated stainless steel tubes that navigate offsets and bends in chimney flues where rigid sections cannot pass. We use flexible liners in Elmhurst’s older homes, particularly in the historic districts near Wilder Park and along York Street, where chimneys often have 30-degree or greater offsets built to avoid structural elements. DuraFlex flexible liners allow us to complete installations that would otherwise require demolition of interior walls or exterior chimney rebuilding. Every flexible liner we install is listed to UL 1777, properly insulated, and pressure-tested before we sign off on the job.
Liner Replacement
Liner replacement becomes necessary when the existing liner, whether clay tile, aluminum, or an older stainless steel installation, has failed beyond repair. In Elmhurst, we replace liners that have deteriorated from condensing gas appliance exhaust, chimney fires that cracked clay tiles, or simple age-related corrosion. We remove the failed liner when possible, or in some cases abandon it in place and install a new properly-sized liner within it. The replacement process includes a full Level 2 inspection to identify why the original liner failed, so the new installation doesn’t repeat the same mistake. Your written scope specifies the liner material, insulation type, and connection method before any work starts.
Partial Chimney Rebuild
A partial rebuild addresses damage confined to the upper portion of the chimney, typically from the roofline up, where brick and mortar suffer the most exposure to Elmhurst’s freeze-thaw cycles and wind-driven rain. We perform partial rebuilds when the lower chimney structure is sound but the crown has failed, allowing water to saturate the brickwork below it. Our crews dismantle the damaged courses to solid masonry, install proper through-wall flashing where the chimney penetrates the roof, rebuild with matching brick when available, and pour a new concrete crown with proper overhang and drip edge. Every partial rebuild includes a new cap and a camera inspection of the flue below to confirm the liner survived the reconstruction.
Full Chimney Rebuild
Full chimney rebuilds are required when the entire structure has compromised integrity, from foundation to cap, due to long-term water infiltration, foundation settlement, or catastrophic damage. We’ve completed full rebuilds in Elmhurst on homes near Salt Creek where groundwater exposure accelerated mortar deterioration, and on chimneys that lost structural stability after improper liner installation by other contractors damaged surrounding brickwork. A full rebuild includes demolition of the existing chimney, foundation repair or replacement if needed, reconstruction to current code with proper clearance to combustibles, installation of a new liner sized to your appliance, and a poured concrete crown. The written price covers all materials, labor, permits, and cleanup; nothing is added after the fact.
Liner Repair
Liner repair addresses localized damage that doesn’t warrant full replacement, using techniques like HeatShield cerfractory resurfacing for cracked clay flue tiles or stainless steel sleeve insertion for isolated breaches. In Elmhurst, we often repair liners where a single clay tile has cracked at a joint but the surrounding tiles remain sound, or where a stainless steel liner has a small breach from improper installation. HeatShield is a cerfractory (ceramic-refractory) compound we apply with specialized tools to fill cracks and restore a smooth, sealed flue surface. When repair is viable, we document the damage, explain why repair beats replacement in your specific case, and warranty the repair under our 365-Day Done Right Promise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Chimney Liner & Rebuild
We source liner materials through Haven’s buying network to keep customer prices honest, with direct relationships with DuraFlex, HeatShield, Gelco, and Olympia Chimney. DuraFlex flexible and rigid liners form the backbone of most of our stainless steel installations; we’ve run thousands of feet of their corrugated and smooth-wall products in Elmhurst and surrounding communities, and we stock common diameters and connection components to reduce wait times. HeatShield’s cerfractory resurfacing system allows us to repair rather than replace clay flue liners in cases where the damage is surface cracking without structural compromise, saving Elmhurst homeowners the cost of full liner replacement when conditions permit.
Gelco and Olympia Chimney supply caps, dampers, and specialty fittings that integrate with our liner installations to create complete, warrantied systems. Whether you have a DuraFlex liner that needs inspection, a HeatShield repair that requires evaluation, or any other manufacturer’s components in your chimney, we can assess its condition, document our findings with camera footage, and recommend repair or replacement based on what we find rather than what we sell. Our free second opinion service applies to any written estimate you’ve received from another contractor using any of these brands.
Before
AfterSigns You Need Chimney Liner & Rebuild Right Now
- White efflorescence or spalling brick on the exterior. These white salt deposits and flaking brick surfaces mean water is getting inside the chimney structure, freezing, and pushing the brick face off. In Elmhurst’s climate, this accelerates every winter; what starts as cosmetic becomes structural when enough brick faces detach.
- Bits of clay tile in the firebox or at the cleanout door. Those fragments are pieces of your flue liner that have cracked and fallen. A compromised clay liner allows heat, sparks, and combustion gases to reach combustible framing, and it cannot be repaired with sealants or patches.
- Smoke or odors entering living spaces when the fireplace or furnace runs. This indicates a breach in the liner or a chimney blocked by liner collapse. Carbon monoxide and smoke belong outside; if they’re inside, the liner has failed at its one job.
- Water stains on the ceiling near the chimney or rusted firebox components. Water entering through a cracked crown, failed flashing, or deteriorated mortar joints corrodes metal components and destroys liner integrity from the outside in. The liner damage is usually worse than the visible water stain suggests.
- Your home inspector or insurance company flagged the chimney. Elmhurst home sales frequently uncover chimney issues during buyer inspections, and insurers increasingly require documented liner condition before binding coverage. A Level 2 inspection with photo documentation satisfies both requirements and gives you a written scope for any needed work.
Our Chimney Liner & Rebuild Process - Step by Step
- 1
Schedule your camera inspection. Call (708) 498-3199 and speak with a live person, any time of day. We’ll confirm your address in Elmhurst, note your chimney type and appliance, and schedule a Level 2 inspection. You’ll receive a text when your technician is en route, including their name and photo.
- 2
NFPA 211 Level 2 inspection with photo documentation. Your technician runs a high-resolution camera the full length of the flue, capturing footage of every square inch of liner surface, every mortar joint, and every transition. We inspect the exterior for crown condition, flashing integrity, and brick deterioration. All findings are documented with photos and video under Clause 4 of the Haven Standard.
- 3
Written price, written scope, written warranty. Before any work is proposed, you receive a single-page document with your exact price, exactly what work it covers, and exactly what warranty applies. This is Haven Standard Clause 1: Have it in writing. No verbal estimates, no “we’ll see once we start,” no surprises.
- 4
Material staging and installation. For liner work, we fabricate or order materials to your flue’s exact dimensions. For rebuilds, we source matching brick when possible and stage materials to minimize disruption. Installation follows manufacturer specifications and local code; your technician explains progress at each stage and shows you camera footage of the completed work.
- 5
Final documentation and 365-Day Done Right Promise. You receive a complete photo record of the finished installation, a written warranty card, and our commitment that if anything isn’t done right, we’ll make it right within one year. This documentation goes to your homeowner file and can be forwarded to your insurer or the buyer when you sell.
How Much Does Chimney Liner & Rebuild Cost in Elmhurst?
Chimney liner installation in Elmhurst typically runs $2,800 to $4,500 for a standard stainless steel liner in a single-flue chimney with straightforward access. Flexible liner installations in chimneys with offsets or multiple bends range from $3,200 to $5,500. Liner replacement where we must remove or abandon an existing liner adds $400 to $800 for extraction labor. Partial chimney rebuilds from the roofline up generally cost $4,500 to $7,500 depending on height, brick matching requirements, and whether the flue needs relining as part of the project; see how much Chimney Liner & Rebuild costs for full details. Full chimney rebuilds in Elmhurst start around $8,500 and can exceed $15,000 for multi-flue structures with complex flashing or foundation work.
Several factors move these prices. Chimney height and roof pitch affect labor hours and safety equipment needs; we don’t guess at either during the estimate. Access for material staging matters: a chimney tight against a neighbor’s property line in central Elmhurst requires different logistics than one with open yard access near Berens Park. Liner diameter and insulation requirements depend on your appliance’s BTU output and venting category, not on what we have in stock. Brick matching for rebuilds varies: common reds and buffs are readily available, but some of Elmhurst’s 1920s cream brick or glazed architectural units require special order.
What you receive for these prices includes all labor, materials, permits, and cleanup. The camera inspection that determines your scope is included; the photo documentation is included; the written warranty is included. We don’t charge separately for “inspection fees” or “diagnostic visits” that other companies use to get their foot in the door. If you’ve received a written estimate from another contractor, our free second opinion service lets you compare scope, materials, and price point for nothing.
To avoid overpaying, insist on camera evidence of liner damage before authorizing replacement. We’ve reviewed competitor quotes in Elmhurst that recommended full liner replacement for clay tile joints that could have been repaired with HeatShield, or rebuilds for chimneys with sound structure and failed crowns that only needed cap and crown work. The camera doesn’t lie, and neither do we.
| Service | Typical Range in Elmhurst | What Affects Price Most |
|---|---|---|
| Stainless steel liner installation | $2,800 - $4,500 | Flue height, diameter, insulation needs |
| Flexible liner installation | $3,200 - $5,500 | Offset angles, access difficulty |
| Liner replacement (remove + replace) | $3,200 - $5,300 | Extraction complexity, disposal |
| Partial rebuild (roofline up) | $4,500 - $7,500 | Brick matching, flue relining included |
| Full chimney rebuild | $8,500 - $15,000+ | Foundation, height, multi-flue design |
| Liner repair (HeatShield) | $1,200 - $2,800 | Linear feet of damage, access |
Chimney Liner & Rebuild Near Elmhurst - Our Service Area
Level Two Chimney Co. serves Elmhurst and surrounding communities including Chimney Liner & Rebuild in Lombard, Chimney Liner & Rebuild in Westchester, Glen Ellyn, Hinsdale, Elmwood Park, Oak Park, Downers Grove, Bloomingdale, Wheaton, Park Ridge, and Arlington Heights. Most Elmhurst appointments are scheduled within three to five business days, with emergency response available for active water infiltration or suspected liner collapse. Whether you’re near York and Butterfield or in the historic neighborhoods south of the railroad tracks, we know the chimney types common to your home’s era and can diagnose problems efficiently. Call (708) 498-3199 to confirm availability for your address.
Serving Elmhurst, IL - Our Local Coverage Area
We’re based in the Elmhurst area and know this community well, and we also handle Westchester Chimney Liner & Rebuild. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Chimney Liner & Rebuild in Elmhurst
Chimney liner work involves installing, replacing, or repairing the protective tube inside your flue that carries combustion gases safely to the outside; rebuild work addresses the brick, mortar, and crown structure that surrounds and supports that flue. Together they ensure your chimney vents properly, protects your home from fire and carbon monoxide, and meets current building codes. Every project we undertake in Elmhurst begins with a camera inspection so you understand which of these services you actually need. Call (708) 498-3199 for an exact quote - estimates are free.
Most stainless steel and flexible liner installations are completed in one day; partial rebuilds typically take two to three days, and full rebuilds require three to five days depending on weather and material availability. We stage materials in advance and work consecutive days once started to minimize disruption. Your written scope includes a projected timeline before you commit. Call (708) 498-3199 for an exact quote - estimates are free.
Chimney liner installation in Elmhurst ranges from $2,800 to $5,500 depending on liner type and flue complexity; rebuilds range from $4,500 for partial work to $15,000 or more for full reconstruction with foundation repair, and we also serve nearby Lombard Chimney Liner & Rebuild. We provide exact written prices after camera inspection, never ballpark figures that change once work begins. Our free second opinion service helps you verify competitor quotes. Call (708) 498-3199 for an exact quote - estimates are free.
Yes, we install and service DuraFlex, HeatShield, Gelco, and Olympia Chimney products, and we can assess and repair any manufacturer’s liner system currently in your chimney. Our buying relationships with these suppliers keep replacement part costs controlled and allow us to match existing installations when partial repair is the right approach. We document what brand you have and why it matters for your specific repair. Call (708) 498-3199 for an exact quote - estimates are free.
Yes, we respond to active chimney emergencies including suspected liner collapse, water pouring through the chimney into living spaces, and post-chimney-fire damage assessment. Our live phone support operates 24 hours a day, 7 days a week; if you smell smoke where you shouldn’t or see visible flame or spark escape from your chimney, exit the home and call us after ensuring your safety. We prioritize emergency calls and can often inspect same-day or next-day. Call (708) 498-3199 for an exact quote - estimates are free.
All liner and rebuild work is backed by our 365-Day Done Right Promise: if it’s not done right, we make it right, period. Manufacturer warranties on DuraFlex, Olympia Chimney, and HeatShield materials range from lifetime to 20 years depending on product line, and we register these warranties in your name. Your written warranty card specifies what’s covered, by whom, and for how long. Call (708) 498-3199 for an exact quote - estimates are free.
Clear a path from your driveway to the chimney area, remove valuables from the mantel and hearth, and ensure we have access to your electrical panel if we’re running power tools for rebuild work. For liner installations, we need the fireplace or appliance cool for 24 hours before arrival. We’ll confirm any specific preparation needs when we schedule and send a reminder text the day before. Call (708) 498-3199 for an exact quote - estimates are free.
Schedule Your Chimney Liner & Rebuild Service in Elmhurst Today
Call (708) 498-3199 now to speak with a live person and schedule your NFPA 211 Level 2 camera inspection. You’ll receive a written price before any work begins, a documented photo record when it’s done, and the 365-Day Done Right Promise on every job. Corrine Halstead and the team at Level Two Chimney Co. have served Elmhurst homeowners since 2009 with no-hassle upfront pricing and verified, uniformed crews. Your estimate is free, your second opinion is free, and your decision is yours to make with full information.
Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Elmhurst since 2009.