Olympia Chimney Chimney Cap & Crown Nationwide

Olympia Chimney Chimney Cap & Crown in Elmhurst: What to Know First

We provide independent Olympia Chimney chimney cap and crown service in Elmhurst, with most jobs completed in a single visit after a camera inspection. A written price is delivered before any work starts, and every job carries our 365-Day Done Right Promise. This page is for homeowners who have an Olympia Chimney cap or crown showing rust, separation, or water staining, and want to know what repair actually costs and whether the original warranty still matters. Call (708) 498-3199 for a free estimate.

Call (708) 498-3199

How Olympia Chimney Products Fail - and How We Fix Them

• Olympia Chimney Gelco stainless caps: The 304-grade mesh on older Gelco units installed across Elmhurst’s 1920s bungalows near York Woods can pit through in 7-10 years from freeze-thaw cycling and road salt aerosol carried on west suburban winds. We measure the mesh integrity with a borescope, then source replacement mesh or full cap through Haven’s buying network, documenting the grade change in your photo record.
• Olympia Chimney multi-flue caps with integrated dampers: The damper linkage seizes when grease and creosote migrate up from below, common in homes burning pressed logs. We disassemble the damper, clean the pivot points, and reseat the cap with a proper storm collar. If the damper casting is cracked, we quote a replacement from Famco or Gelco stock, not a generic fit.
• Olympia Chimney concrete crowns with factory sealant: The thin factory seal coat on pre-2015 Olympia crowns chalks and alligators within 5-6 years in Elmhurst’s climate, where south-facing chimneys see 40°F temperature swings in a single March afternoon. We grind back to sound concrete, apply a breathable silane-siloxane base, then top with CrownCoat or HeatShield CrownSeal depending on crack width, measured and photographed.
• Olympia Chimney galvanized caps on oil-flue installations: Sulfur compounds from older oil burners accelerate galvanized cap failure from the inside out, a pattern we see in Elmhurst’s post-war ranch stock near Butterfield Road. The cap looks fine from the ground while the underside is paper-thin. We pull the cap, document the interior corrosion pattern, and upgrade to 316 stainless or aluminum depending on flue gas analysis.
• Olympia Chimney custom copper caps: Solder joints at the hip ridges fail when thermal expansion exceeds the alloy’s fatigue limit, usually after 15+ years. We don’t spot-solder; we cut back to sound metal, re-sweat with 95/5 tin-silver, and re-patinate the joint so the repair disappears. The camera shows the joint penetration before we leave the roof.

Our Olympia Chimney Chimney Cap & Crown Process

1. 1
   Call and schedule: A live person answers, notes your Olympia Chimney model if you know it, and books a Level 2 inspection with camera scan. You get a text when your tech is en route.
2. 2
   Camera inspection: We run the camera down the flue first, before touching the cap or crown. Clause 4 of the Haven Standard requires this photo record on every job. The camera doesn’t editorialize. Neither do I.
3. 3
   Diagnosis and parts decision: Corrine Halstead or a named tech shows you the footage, measures the crown for cracks wider than 1/16 inch, and checks cap mesh gauge against OEM spec. We quote OEM Olympia parts when available and cost-justified, or quality aftermarket from Gelco, Famco, or Copperfield through Haven’s buying network. The price and scope are written before work starts.
4. 4
   Repair or replacement: Crown work gets ground, sealed, and top-coated in one visit. Cap replacement includes a new storm collar and proper counterflashing integration. Multi-flue caps are leveled with a laser; single caps get a bead of high-temp silicone at the penetration.
5. 5
   Post-repair verification: We run a smoke pellet or mirror check to confirm draft behavior hasn’t changed. Photos of the completed work are added to your documented record.
6. 6
   Written warranty and cleanup: You receive a written warranty, a copy of the photo record, and our 365-Day Done Right Promise stamped on the invoice. We don’t leave until you’ve seen what you paid for.

Before

After

What Olympia Chimney Chimney Cap & Crown Costs in Elmhurst

These are Elmhurst market prices for 2024-2025, sourced through Haven’s buying network specifically to keep customer prices honest. Every estimate is free, written, and valid for 30 days. Call (708) 498-3199 for an exact quote on your Olympia Chimney cap or crown.

Why Elmhurst Homeowners Call Level Two Chimney Elmhurst for Olympia Chimney Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, every one with a written price before work started and a documented record when done. As an independent Olympia Chimney service provider, we carry no brand obligation to push OEM parts when quality aftermarket from DuraFlex, HeatShield, or Gelco serves you better. Our background-checked, uniformed techs are assigned by name; you get a text when they’re on the way. Live phone support runs 24 hours a day, 7 days a week. And our Free Second Opinion on Any Written Estimate means you can bring us a competitor’s quote and we’ll tell you straight whether the scope and price hold up against what your camera footage actually shows.

FAQs